UK DRY RISERS
Experts in the specialist installation and maintenance of sprinklers, fire hydrants and wet & dry risers
When your people and your property are at risk, you need a specialist you can rely on.
UK Dry Risers is trusted by organisations throughout the UK to supply and maintain their critical wet and dry riser systems, fire hydrants, and fire sprinklers.
We’re the largest BAFE-registered nationwide provider of wet and dry riser services, working alongside end users, contractors and facilities managers to install and support their systems for the long term.
94% of our clients stay with us, because they know we’ll keep their wet and dry risers safe and compliant, should they ever be needed.
Our services include:
Installation & maintenance
– Technical design and support
– Market-leading components
– Standard or bespoke solutions
Testing
– Testing in compliance with BS9990:2015
– Detailed electronic reports
– Certification in 24 hours
Reactive repair
– 24/7 response, out of hours support
– Engineers available nationwide
– Test drain water recycled
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing to verify that the system will still operate as designed after decades of service.
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing
-
Ensures the system is free from corrosion, scale, sludge, and obstructions.
-
Confirms sprinkler heads still operate within design temperature and sensitivity limits.
-
Identifies degradation that cannot be seen externally.
-
Required by UK insurance and LPCB guidance.
-
-
Internal pipe inspection — cutting out sections of pipe to check for corrosion, tuberculation, MIC, or blockages.
-
Obstruction investigation — flushing mains, branch lines, and checking for foreign material.
-
Sprinkler head testing — sending sample heads to an approved lab for heat‑sensitivity testing.
-
Check valves & trims — internal inspection of alarm valves, pre‑action valves, and check valves.
-
System performance review — verifying pressures, flows, and hydraulic integrity.
-
Air/water quality assessment — checking for microbiological activity and corrosion indicators.
-
A formal report is issued, detailing:
-
Pass/fail results
-
Required remedial works
-
Replacement of heads or pipe sections
-
Recommendations for system upgrades
-
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing
– Ensures the system is free from corrosion, scale, sludge, and obstructions.
– Confirms sprinkler heads still operate within design temperature and sensitivity limits.
– Identifies degradation that cannot be seen externally.
– Required by UK insurance and LPCB guidance.
– Internal pipe inspection — cutting out sections of pipe to check for corrosion, tuberculation, MIC, or blockages.
– Obstruction investigation — flushing mains, branch lines, and checking for foreign material.
– Sprinkler head testing — sending sample heads to an approved lab for heat‑sensitivity testing.
– Check valves & trims — internal inspection of alarm valves, pre‑action valves, and check valves.
– System performance review — verifying pressures, flows, and hydraulic integrity.
– Air/water quality assessment — checking for microbiological activity and corrosion indicators.
– Pass/fail results
– Required remedial works
– Replacement of heads or pipe sections
– Recommendations for system upgrades
Our services include:
Installation & maintenance
– Technical design and support
– Market-leading components
– Standard or bespoke solutions
Testing
– Testing in compliance with BS9990:2015
– Detailed electronic reports
– Certification in 24 hours
Reactive repair
– 24/7 response, out of hours support
– Engineers available nationwide
– Test drain water recycled
25-year Sprinkler inspection
– Internal pipework examination
– Obstruction testing
– Full sprinkler head testing
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing
-
Ensures the system is free from corrosion, scale, sludge, and obstructions.
-
Confirms sprinkler heads still operate within design temperature and sensitivity limits.
-
Identifies degradation that cannot be seen externally.
-
Required by UK insurance and LPCB guidance.
-
-
Internal pipe inspection — cutting out sections of pipe to check for corrosion, tuberculation, MIC, or blockages.
-
Obstruction investigation — flushing mains, branch lines, and checking for foreign material.
-
Sprinkler head testing — sending sample heads to an approved lab for heat‑sensitivity testing.
-
Check valves & trims — internal inspection of alarm valves, pre‑action valves, and check valves.
-
System performance review — verifying pressures, flows, and hydraulic integrity.
-
Air/water quality assessment — checking for microbiological activity and corrosion indicators.
-
A formal report is issued, detailing:
-
Pass/fail results
-
Required remedial works
-
Replacement of heads or pipe sections
-
Recommendations for system upgrades
-
Our services include:
Installation & maintenance
– Technical design and support
– Market-leading components
– Standard or bespoke solutions
Testing
– Testing in compliance with BS9990:2015
– Detailed electronic reports
– Certification in 24 hours
Reactive repair
– 24/7 response, out of hours support
– Engineers available nationwide
– Test drain water recycled
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing to verify that the system will still operate as designed after decades of service.
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing
-
Ensures the system is free from corrosion, scale, sludge, and obstructions.
-
Confirms sprinkler heads still operate within design temperature and sensitivity limits.
-
Identifies degradation that cannot be seen externally.
-
Required by UK insurance and LPCB guidance.
-
-
Internal pipe inspection — cutting out sections of pipe to check for corrosion, tuberculation, MIC, or blockages.
-
Obstruction investigation — flushing mains, branch lines, and checking for foreign material.
-
Sprinkler head testing — sending sample heads to an approved lab for heat‑sensitivity testing.
-
Check valves & trims — internal inspection of alarm valves, pre‑action valves, and check valves.
-
System performance review — verifying pressures, flows, and hydraulic integrity.
-
Air/water quality assessment — checking for microbiological activity and corrosion indicators.
-
A formal report is issued, detailing:
-
Pass/fail results
-
Required remedial works
-
Replacement of heads or pipe sections
-
Recommendations for system upgrades
-
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing
– Ensures the system is free from corrosion, scale, sludge, and obstructions.
– Confirms sprinkler heads still operate within design temperature and sensitivity limits.
– Identifies degradation that cannot be seen externally.
– Required by UK insurance and LPCB guidance.
– Internal pipe inspection — cutting out sections of pipe to check for corrosion, tuberculation, MIC, or blockages.
– Obstruction investigation — flushing mains, branch lines, and checking for foreign material.
– Sprinkler head testing — sending sample heads to an approved lab for heat‑sensitivity testing.
– Check valves & trims — internal inspection of alarm valves, pre‑action valves, and check valves.
– System performance review — verifying pressures, flows, and hydraulic integrity.
– Air/water quality assessment — checking for microbiological activity and corrosion indicators.
– Pass/fail results
– Required remedial works
– Replacement of heads or pipe sections
– Recommendations for system upgrades
BAFE SP105 Dry Riser/ Wet Riser Service and Maintenance Scheme
UK Dry Risers is a proud BAFE SP105 registered company – a nationally recognised scheme for companies that have been independently assessed for their fire safety standards.
25-year Sprinkler Inspections
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing
-
Ensures the system is free from corrosion, scale, sludge, and obstructions.
-
Confirms sprinkler heads still operate within design temperature and sensitivity limits.
-
Identifies degradation that cannot be seen externally.
-
Required by UK insurance and LPCB guidance.
-
-
Internal pipe inspection — cutting out sections of pipe to check for corrosion, tuberculation, MIC, or blockages.
-
Obstruction investigation — flushing mains, branch lines, and checking for foreign material.
-
Sprinkler head testing — sending sample heads to an approved lab for heat‑sensitivity testing.
-
Check valves & trims — internal inspection of alarm valves, pre‑action valves, and check valves.
-
System performance review — verifying pressures, flows, and hydraulic integrity.
-
Air/water quality assessment — checking for microbiological activity and corrosion indicators.
-
A formal report is issued, detailing:
-
Pass/fail results
-
Required remedial works
-
Replacement of heads or pipe sections
-
Recommendations for system upgrades
-
A 25‑year inspection is a deep‑level assessment of a sprinkler system that involves internal pipework examination, obstruction testing, sample cutting, and full sprinkler head testing to verify that the system will still operate as designed after decades of service.
It ensures the system remains compliant, insurable, and operational for the next lifecycle period.
– Ensures the system is free from corrosion, scale, sludge, and obstructions.
– Confirms sprinkler heads still operate within design temperature and sensitivity limits.
– Identifies degradation that cannot be seen externally.
– Required by UK insurance and LPCB guidance.
– Internal pipe inspection — cutting out sections of pipe to check for corrosion, tuberculation, MIC, or blockages.
– Obstruction investigation — flushing mains, branch lines, and checking for foreign material.
– Sprinkler head testing — sending sample heads to an approved lab for heat‑sensitivity testing.
– Check valves & trims — internal inspection of alarm valves, pre‑action valves, and check valves.
– System performance review — verifying pressures, flows, and hydraulic integrity.
– Air/water quality assessment — checking for microbiological activity and corrosion indicators.
– Pass/fail results
– Required remedial works
– Replacement of heads or pipe sections
– Recommendations for system upgrades
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing to verify that the system will still operate as designed after decades of service.
Our services include:
Installation & maintenance
– Technical design and support
– Market-leading components
– Standard or bespoke solutions
Testing
– Testing in compliance with BS9990:2015
– Detailed electronic reports
– Certification in 24 hours
Reactive repair
– 24/7 response, out of hours support
– Engineers available nationwide
– Test drain water recycled
25-year Sprinkler inspection
– Internal pipework examination
– Obstruction testing
– Full sprinkler head testing
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing to verify that the system will still operate as designed after decades of service.
25-year Sprinkler Inspection
– Internal pipework examination
– Obstruction testing
– Sample cutting
– Full sprinkler head testing
-
Ensures the system is free from corrosion, scale, sludge, and obstructions.
-
Confirms sprinkler heads still operate within design temperature and sensitivity limits.
-
Identifies degradation that cannot be seen externally.
-
Required by UK insurance and LPCB guidance.
-
-
Internal pipe inspection — cutting out sections of pipe to check for corrosion, tuberculation, MIC, or blockages.
-
Obstruction investigation — flushing mains, branch lines, and checking for foreign material.
-
Sprinkler head testing — sending sample heads to an approved lab for heat‑sensitivity testing.
-
Check valves & trims — internal inspection of alarm valves, pre‑action valves, and check valves.
-
System performance review — verifying pressures, flows, and hydraulic integrity.
-
Air/water quality assessment — checking for microbiological activity and corrosion indicators.
-
A formal report is issued, detailing:
-
Pass/fail results
-
Required remedial works
-
Replacement of heads or pipe sections
-
Recommendations for system upgrades
-
Why organisations throughout the UK choose to work with UK Dry Risers
It’s not just for our expertise in installing and maintaining their systems:
-
Our engineers are directly employed by UK Dry Risers. There’s no commission or bonuses, and no unnecessary repairs. Just the highest standard of service to keep your people and your premises safe.
-
We understand the need for a rapid turnaround on inspections. After we visit, your fire safety certificate will be in your hands within 24 hours. If urgent, we can be on your site the same day.
-
94% of our work is repeat business from existing customers who trust us with their important fire servicing.
-
Sustainability is our watchword. We recycle 80-90% of all water used during your service back into our vehicle tanks. There’s no water dumping.
Qualified & experienced engineers
UK nationwide coverage, 24/7
Out of hours support where needed
Part of the
PTSG Family
Who we work with...
Our experience ranges from installations in small care homes, to 50 storey apartment blocks, and some of the most prestigious addresses in the UK.
